On older model decapsulation systems, all of the tubing as well as the supply and waste bottle caps are fixed to the system. For this type of system, please pair the caps so that nitric supply is with nitric waste and sulfuric supply is with sulfuric waste, and then put those individual pairs into lab-safe nitrile gloves. Do your best to seal the opening of the gloves with a rubber band.
Newer Systems (JetEtch Pro and Newer):
For JetEtch Pro series models, simply disconnect the tubing at the bulkhead on the rear panel of the main unit. Once this has been done, the tubing can lay freely and you can pack and return the main unit only.
Please also be sure to follow the water clean-out procedure before attempting to pack your system. This must be done for all systems, regardless of model.